How to start using the robot? Start, registration and installation

How to start using the robot? Start, registration and installation

To start using the tool, we will have to go through the process of installing, registering the robot and running it.

Running the application

To run the robot for the first time, start the robot by clicking on the AUTOMADE Robot icon

Robot registration

The user starts the registration of the robot by entering the PIN code received in the e-mail invitation. If an invitation was not sent, then all the data needed to register the robot must be obtained directly from the HUB administrator.

Initial start-up of the robot

After entering the PIN code, press the “Configure” button. The last step of robot registration will be displayed. The robot name, HUB address and PIN code will be completed automatically. If this does not happen, then the corresponding values sent in the email invitation must be entered. If the invitation was not sent, then these data must be obtained directly from the HUB administrator. The user sets the password with which they will log on to the program. After entering all the data, press the “Register” button.

Next start-up of the robot

After successful registration, the user will be taken back to the login menu, where in the field “Robot name” should allow the user to select an already registered robot. The “Password” field should contain the password that was used when registering the robot. Once both fields have been completed, clicking the “Login” button will log the robot into the HUB and start the AUTOMADE Robot program. In addition, the user has the option to have the password remembered by the program by checking the “Do not log out the Robot” option